Cables of unknown category laid without marking
INFRASTRUCTURE THAT DOES NOT NEED REBUILDING
LAN, Wi-Fi, SCS & Optics
Structured cabling systems, cabinets, switching, optical lines, and wireless network for business.
MAIN RESULT
The network must support current systems and a clear expansion. We design ports, PoE, backbones, reserve, segmentation, and documentation before cameras and controllers start competing for resources.
PRACTICAL SCENARIO
How the solution helps in a real-world situation
The company adds cameras and new workstations without replacing all the cabling. Free ports, PoE budget, and optical reserve are provided, each line is labeled and found in the as-built diagram.
WHERE THE RESULT IS LOST
The problem is rarely located in a single device
We check the project, installation, settings, power, data, and maintenance as a single chain.
The PoE switch cannot handle the connected load
Wi-Fi shows a strong signal but does not provide stable operation
Office and Security Network Not Separated
SCOPE OF WORK
What we design and inspect
Work boundaries and acceptance criteria are recorded before equipment purchase
- 01
We compile a plan of workplaces and engineering systems
- 02
Calculating copper and optical main lines
- 03
Designing Cabinets, Power, PoE, and Segmentation
- 04
Testing lines, coverage, and transferring labeling
HANDOVER TO THE CLIENT
What remains with the owner of the system
- Socket and Trace Plan
- Ports and addresses table
- Marked Lines
- Test Protocols
- Capacity reserve and actuator circuit
BEFORE ORDER
Questions: networking, wi-fi & scs
Short answers to questions that affect the composition, cost, and reliability of the solution.
01How does structured cabling differ from regular cable laying?
The structured cabling system has a unified structure, component categories, labeling, patch panels, and documentation. This allows changing the port assignment without a new route.
02When do you need optics?
For long distances, high bandwidth, electrical interference, or inter-building connections. Fiber type and spare capacity are chosen based on the facility’s future prospects.
03How do I calculate Wi-Fi?
Based on layout, wall materials, number of clients, applications, and interference. Counting points per area without assessment often creates overload zones.
04What is a PoE budget?
This is the power that the switch can simultaneously provide to cameras, access points, and other devices. The sum of the ports in the datasheet is not always equal to the available power.
05Can I use the office network for cameras?
It is possible in calculation and logical separation, but critical systems should not influence each other uncontrollably. Segmentation and access rights are defined by the project.
06Do you test the cable after installation?
Yes. The scope of tests depends on the class of the line and the requirements of the project. The results, labeling, and port compliance are shared with the customer.
ENGINEERING CONSULTATION
Let's discuss: networking, wi-fi & scs
Send the city, facility purpose, photos or plan and the current problem. Let's determine the initial data for a accurate proposal.