When no one is home
Leak, smoke, or opening should not wait until the owner sees a message. Where it is safe, the system performs local action automatically.
KRONIS HOME SAFETY · ALMATY
The house detects danger.
And valid until you return.
We combine leaks, smoke, gas, doors, cameras, intercom, locks, gates, and backup power into a clear security system — with local scenarios, manual control, and documentation.
01 · DISCOVERUnderstand what happened and where
Addressable sensors instead of general alarm.
02 · LIMITPerform Safe Action
Shut off water, save recording, close the loop.
03 · REPORTConvey a clear notice
Event, zone, time, and automation result.
04 · SAVEOperate under typical failure
Local logic, manual mode, and power backup.
NOT GADGETS, BUT SCENARIOS
Security doesn't start with the app
The real task of the owner is not to be the first to know about the problem, but to reduce the consequences and quickly understand the next step.
When the power and internet went out
Critical functions are not built around a single cloud service. Determine what works locally, what is powered by backup, and how manual control is maintained.
When the installer has already left
The owner receives administrator rights, a diagram, a list of equipment, scenario logic, and a clear testing procedure — the system does not remain hostage to a single specialist.
10 PROTECTION CIRCUITS
Start with the Risk That Matters Most to You
Each direction is an independent service and part of the overall architecture. It can be implemented in stages.
01 · WATER UNDER CONTROL
Leak Protection
Sensors at risk points, a controller, and a clear response scenario for apartments, houses, and commercial premises.
Parse Solution ↗02 · REACTION WITHOUT EXPECTATIONWater Shutoff
Electric actuators on the water supply, which close the desired line in case of a confirmed leak and maintain manual control.
Parse Solution ↗03 · EARLY DETECTIONSmoke, Gas and Temperature
Detectors for a specific room risk: smoke, hazardous temperature, household gas or carbon monoxide – without mixing different tasks.
Parse Solution ↗04 · UNDERSTAND AND ACTEmergency Notifications
Targeted messages to the owner and trusted people: what happened, where, when, and what action the system has already performed.
Parse Solution ↗05 · SEE THE CAUSE, NOT JUST THE ALARMVideo Surveillance
Cameras, recording and remote access designed for specific questions: who entered, what happened and whether the evidence has been preserved.
Parse Solution ↗06 · CONTROLLED INPUTVideo Intercom
Call, video, talk and open a door or gate from a clear interface - at home and remotely.
Parse Solution ↗07 · LIVING PERIMETERDoors & Windows
Opening and status sensors that indicate not just an alarm, but a specific unlocked door, window, or sash.
Parse Solution ↗08 · ACCESS WITHOUT EXTRA KEYSSmart Locks
Locks by code, card, biometrics, or app with a secure mechanical scenario and managed permissions.
Parse Solution ↗09 · SINGLE ENTRY AND CLOSURE SCENARIOGates & Roller Shutters
Control of drives from an app, control panel, intercom, or scenario with monitoring of the actual position and movement safety.
Parse Solution ↗10 · NETWORK OUTAGE SECURITYBackup Power
Calculation and installation of backup for the controller, communication, sensors, cameras, intercom, locks, and other truly important loads.
Parse Solution ↗HOW TO ASSEMBLE THE SYSTEM
One responsible circuit instead of a set of applications
Specific brands are selected after the task, facility, and compatibility check.
- 01
Risk Map
Who lives in the house, what can happen, which consequences are unacceptable, and who needs to be notified.
- 02
Architecture
Sensors, actuators, communication, local logic, manual mode, and backup.
- 03
Real Tests
We check water, power outages, loss of connection, access, and notifications under working conditions.
- 04
Transmission & Service
Documents, owner rights, family training, inspection schedule, and expansion capability.
IMPLEMENTATION BY STAGES
It’s not necessary to automate the whole house at once
Rational first stage closes the most likely risk and creates the basis for the following functions.
Prevent Damage
Leaks, water shutoff, smoke, gas, temperature, emergency notifications
Control access
Doors and windows, cameras, video intercom, smart lock, gates and roller shutters.
Keep Healthy
Power Backup, Backup Communication, Periodic Testing and Maintenance.
OWNER'S QUESTIONS
What is important to decide before installing Home Safety
Short answers to questions that affect the composition, cost, and reliability of the solution.
01What is included in KRONIS Home Safety?
This is not a single set, but an engineering home safety circuit: leak, smoke, gas, door opening, or other dangerous situation detection; automatic action where permissible; owner notification; video verification of the event; power backup and clear manual control.
02Is it necessary to install all systems at once?
No. You can start with the risk that is most expensive for you — for example, leaks — and lay out the architecture for cameras, locks, gates, and backup in advance. We plan the stages so that the next stage does not require redoing what is already installed.
03Will the protection work without the Internet?
We design critical local scenarios without necessarily depending on the cloud: the sensor must transmit an alarm to the controller, and the actuator must execute the command inside the facility. Without the Internet, remote notification or viewing may temporarily disappear, so we are discussing a backup communication channel separately.
04What happens in the event of a power outage?
Before selecting equipment, determine which devices must continue to operate: controller, communication, cameras, intercom, sensors, or valve actuator. Then calculate the reserve by power and required time, rather than choosing a battery at random.
05Can I connect cameras, intercom or gates that are already installed?
Often possible, if the equipment has appropriate interfaces and is operational. During inspection, we check models, power supply, network, protocols, access to accounting data, and integration security. Things that cannot be reliably combined are honestly separated from the new system.
06How is access to the application and equipment protected?
We separate the rights of the owner, family, and servicing specialist, change factory passwords, enable available multifactor protection means, document accounts, and eliminate permanent remote access for the installer when not necessary.
07Who is responsible for the system after installation?
Upon handover, you receive a list of equipment, a diagram, scenario logic, access, and instructions. Additionally, periodic checks of sensors, drives, batteries, archive, and notifications can be agreed upon — because safety must be regularly verified by testing.
ENGINEERING CONSULTATION
We will make a risk map of your home
Describe the apartment or house, the stage of renovation, and what you are most concerned about. We will suggest the first reasonable step without imposing full automation.