EQUIPMENT · MODELS · SPECIFICATIONS

Engineering Equipment Catalog

Compare models by purpose and verified parameters. The final composition of delivery is checked against the site, project, and customer requirements.

DIRECTORY STRUCTURE

Select a category or find a model

Only verified data is published in the catalog. Availability, compatibility, and final cost are confirmed in the commercial offer.

MODELS25
УНOn Request

UNIAR

Hydraulically Operated Bollard

Automatic retractable bollard: the hydraulic station is placed inside the shaft, so no separate hydraulic equipment cabinet is required on-site next to the passage.Price on requestХарактеристики
УНOn Request

UNIAR

External Hydraulic Bollard

Automatic retractable bollard with a remote hydraulic station. Suitable for groups of bollards and sites where the technical unit is more convenient to service outside the driveway.Price on requestХарактеристики
УНOn Request

UNIAR

Stationary Bollard

A permanent perimeter power element without a drive. It is used where vehicle access does not need to be opened, but pedestrian access and the appearance of the territory must be preserved.Price on requestХарактеристики
УНOn Request

UNIAR

Reinforced UNIAR PRO - Electromechanical

Automated reinforced barrier for controlled entry. The automation components and operating mode are chosen based on the driveway length and actual checkpoint intensity.Price on requestХарактеристики
УНOn Request

UNIAR

Reinforced UNIAR PRO – Hydraulic

Reinforced lift barrier with hydraulic drive for facilities requiring automatic operation of a heavy arm and coordination with checkpoint systems.Price on requestХарактеристики
УНOn Request

UNIAR

Reinforced MINOR PRO - Manual

Manual version of a reinforced barrier for passages with limited intensity, backup entrances, or sites without constant power supply.Price on requestХарактеристики
УНOn Request

UNIAR

Lifting Single-Sided - Manual

A one-way lifting structure with manual control for passages where independence from the power grid and simple operational logic are important.Price on requestХарактеристики
УНOn Request

UNIAR

Lifting Single-Sided - Electromechanical

Automatic one-way barrier for regular traffic. Can be connected to ACS, traffic lights, loops, and guard post commands.Price on requestХарактеристики
УНOn Request

UNIAR

Lifting Double-Sided - Manual

The two-sided structure blocks the passage with opposing sections. Manual execution is suitable for rare cycles and backup modes.Price on requestХарактеристики
УНOn Request

UNIAR

Lifting double-sided — electromechanical

Automated closure of a wide passage by two coordinated sections. The synchronization and safety algorithm is defined by the project.Price on requestХарактеристики
УНOn Request

UNIAR

Sliding - Manual

Horizontally movable cover with manual control. Before selection, the side retraction zone, base, and safe position of the structure are checked.Price on requestХарактеристики
УНOn Request

UNIAR

Sliding - Electromechanical

Automated retractable structure for sites where boom lifting is undesirable or height-limited. Requires a clear zone along the fence.Price on requestХарактеристики
УНOn Request

UNIAR

Swing - Electromechanical

Automatic swing design for entrance with sufficient door swing area. Photocells, hinges, and emergency commands are integrated into a single safety logic.Price on requestХарактеристики
УНOn Request

UNIAR

Swing - Manual

Swing-type barrier with manual control for infrequent passages. During inspection, slope, wind load, and safe section trajectory are checked.Price on requestХарактеристики
УНOn Request

UNIAR

Invoice - Manual

A surface structure with manual operation, allowing reduction of construction depth. The geometry of ramps and vehicle clearance is checked before ordering.Price on requestХарактеристики
УНOn Request

UNIAR

Overhead - Hydraulic

Automatic surface-mounted blocker for existing entrances where deep embedding is difficult. Verification of the base, drainage, and allowable passage profile is required.Price on requestХарактеристики
УНOn Request

UNIAR

Waybill – Electromechanical

Electromechanical surface system for checkpoint automation without a deep pit. Cycle intensity and winter conditions are taken into account when choosing the version.Price on requestХарактеристики
УНOn Request

UNIAR

Buried - Hydraulic

Automatic blocker, the working part of which is retracted into the road shaft in the open position. Requires a complete foundation design, drainage, and maintenance access.Price on requestХарактеристики
УНOn Request

UNIAR

Buried - Electromechanical

Embedded automatic system with electromechanical drive. Selection takes into account the mass of the moving part, the number of cycles, power supply, and failure scenario.Price on requestХарактеристики
УНOn Request

UNIAR

Buried - Manual

Manual recessed solution for backup or low-traffic entry. Does not require an automatic drive, but retains requirements for the foundation and drainage.Price on requestХарактеристики
УНOn Request

UNIAR

Reinforced overlay UNIAR PRO — hydraulic

Reinforced automatic overlay structure for facilities with increased requirements for physical passage coverage and limited work depth.Price on requestХарактеристики
УНOn Request

UNIAR

Compact Barrier - Electromechanical

Compact automatic design for sites with limited space. The purpose and actual protection level are always verified against the datasheet and protocols.Price on requestХарактеристики
УНOn Request

UNIAR

Barrier Barrier

Barrier fencing for organizing a physical boundary. The placement scheme, anchoring, and declared indicators are verified for the specific delivery.Price on requestХарактеристики
УНOn Request

UNIAR

Sliding gates MINOR PRO – manual

Reinforced sliding gates with manual movement for backup and low-load passages. Space for sliding and a calculated power foundation are necessary.Price on requestХарактеристики
УНOn Request

UNIAR

UNIAR PRO sliding gates — electromechanical

Automated reinforced gates for a wide controlled entrance. The drive, movement safety, and interaction with ACS are designed as a single system.Price on requestХарактеристики
01

Not a showcase for quantity

We show models that we can correctly select, install, launch, or service.

02

Feature Comparison

Specifications are linked to the facility’s task, not used as a set of promotional numbers.

03

Supply Responsibly

Before ordering, we fix the configuration, work, deadlines, warranty, and limits of service support.

ENGINEERING CONSULTATION

We will select equipment for your facility

Describe what needs to be protected, automated, or powered. We will ask precise questions and suggest the next engineering step.

WhatsApp will open with a prepared request. The message will be sent only after you confirm it.